Spring Framework of Dust Collector
The spring frame is made of 4mm Diameter spring steel wire wound on the lathe. It is used on the dedusting filter bag with a length of more than 3000mm. The upper end is hung on the top of the filter bag chamber, and the lower end is hung on the hook in the flower plate iron ring. This kind of framework is light and easy to manufacture. The disadvantage is that the long filter bag is easy to vibrate under the influence of external force, which affects the service life of the filter bag. If used in corrosive fumes, stainless steel wire is recommended.
The spring dedusting frame is used to support the dedusting filter bag in the deduster, which is conducive to the distribution of dust and improve the dedusting efficiency. The quality directly affects the service life of the dedusting filter bag and the dedusting effect of the dedusting equipment. The production of the frame is usually customized according to the requirements of the installation environment, with reasonable structure and It is widely used in chemical industry, metallurgy, building materials, thermal power, food and other industries.
The spring frame is divided into venturi tube and non venturi tube. The diameter of the spring of the dedusting frame is generally less than 130 mm, which is wound by a steel wire with a diameter of 5 mm. It is generally 35 turns / m after stretching, and the stretching length is generally 1.5m, 2M and 2.5m. The post-treatment surface is galvanized.
The design structure of the spring dedusting frame is strong and reliable, with long service life. Material: low carbon steel wire, galvanized steel wire, stainless steel wire. Surface treatment of spring framework: zinc plating, plastic spraying, anti-corrosion treatment, silicone coating, etc.
Generally, the diameter of spring skeleton is less than 120 mm, 25 turns / m after stretching, and the surface is galvanized. The spring skeleton has the flexibility. Because the dust collector is limited by the indoor space, there is no space on the top of the dust collector to replace the dust skeleton, so the spring skeleton or (plug) multi section dust skeleton is used in the design.
Spring skeleton is one of the commonly used dust skeleton, which has the flexibility. Because the dust collector is limited by the indoor space, there is no space on the top of the dust collector to replace the dust bag cage, so the spring skeleton or (plug in) multi section skeleton is used in the design. Spring frame is the accessory of external filter dust remover. The surface can be galvanized or sprayed.
The spring frame is the frame of the filter bag for dust removal. The quality of the frame directly affects the working state and service life of the filter bag. The spring frame produced by our company is galvanized or sprayed with plastic on the surface, and other coatings can be plated on the surface according to the requirements of different working conditions of customers.
