Organosilicon Framework of Dust Collector

　　Organosilicon dust removal framework is a special framework for power plant desulfurization and dust removal. The product is made of carbon steel or stainless steel wire with sufficient strength, which is welded once by special equipment. After welding, the organosilicon dust removal framework is galvanized on the surface to prevent rust. The organosilicon dust removal framework is widely used in high temperature and high corrosion environment.

　　The organosilicon dust removal framework is the frame of the filter bag, which is light, easy to install and maintain, firmly welded, smooth and straight in appearance. The quality of organosilicon dust removal framework directly affects the working state and service life of the filter bag.

　　The quality of organosilicon dust removal framework directly affects the working state and service life of the filter bag. Organosilicon dust removal framework plays an important role in practical use. The organosilicon dust removal framework can operate and work accurately according to the form and situation, adapt to the market changes, fully show the advantages and characteristics of organosilicon dust removal framework, and work well according to the market situation in the dust removal work.

　　The use temperature of organosilicon dust removal framework can be around 280 ℃ in industrial and mining environment, and the instantaneous use temperature can reach 300 ℃. In some special environments, it can replace the stainless steel dedusting framework and reduce the manufacturing cost of the enterprise. The production process of organosilicon dust removal framework is the same as that of spray plastic dust removal framework, but the temperature and time of spray plastic dust removal framework is higher than that of spray plastic dust removal framework in the drying process, and the powder sprayed on the framework surface of the precipitator is organosilicon powder.

　　Organosilicon dust removal framework is suitable for dust control of industrial boilers and thermal power station boilers of various models and combustion modes. The problem of dust accumulation at the bottom of filter bag in organosilicon treatment bag cage needs to be treated in time to ensure that it can play a full role in the industry, avoid damage to organosilicon treatment bag cage, and ensure that organosilicon treatment frame continues to produce good dust in the dust removal process Performance and value.

　　Production process of organosilicon dust removal framework:

　　1. Immerse the processed bag cage in the oil removal tank for 15 minutes to remove the oil stain on the surface of the bag cage.

　　2. Take out the bag cage from the oil removal tank and put it into the cleaning tank for immersion cleaning, so as to remove the oil remover on the bag cage.

　　3. Take out the bag cage from the cleaning tank and put it into the derusting tank for derusting treatment, so as to remove the metal oxide layer on the bag cage and enhance the adsorption.

　　4. The cage bone is taken out from the derusting tank and put into the phosphating tank for phosphating treatment, so as to enhance the adhesion of the bag cage surface.

　　5. Put the treated bag into the oven at a temperature of $2100 ℃, and dry for 20-30 minutes, so as to remove the water on the bag and keep the bag dry.

　　6. Take out the bag cage and spray the prepared silicone evenly on the bag cage surface. The coating thickness is 60 μ m ~ 100 μ M.

　　7. Put the sprayed bag cage into the oven at a temperature of $2220 ℃, and bake for 120 minutes. Then keep it at $2200 ℃ for 30 minutes. By cooling the bag cage naturally, the silicone spray process of bag cage is completed.

　　8. The thickness of silicone adhesive is 60-70 μ M.

　　The organosilicon dedusting framework plays an auxiliary role in the dedusting bag. The quality of dust skeleton is seriously affected by the life of dust filter bag. Silica gel skeleton has the characteristics of corrosion resistance and high smoothness. It can protect the dust bag, prevent the rust and the appearance of the filter bag, and change the bag smoothly to reduce the dust removal. Damage to the filter bag. Silica gel dedusting frame is suitable for all kinds of high temperature and corrosive environment, such as waste incineration, coal, power plant, etc.

　　The special frame of power plant dedusting from organosilicon dedusting frame is made of enough strength carbon steel or stainless steel wire. Special equipment is welded once, forming. Silica gel dust removal framework is welded after galvanizing to prevent rust. It is widely used in high temperature and high corrosion environment. The quality of organosilicon dust removal framework coating plays an important role in the quality, performance and service life of bag cage. Organize construction and quality control in strict accordance with coating process requirements. Special packing and logistics are also required for the transportation of dust removal framework to ensure that the framework for removing dust during transportation will not be damaged.

　　Silicone dust removal skeleton is the same production line of spray dust removal skeleton, but the temperature and time in the drying process are higher than that of the spray dust skeleton, and the dust collector on the powder spraying surface is the organic silicon powder. The application time of organosilicon powder under the production condition can be up to ten years. The dust skeleton solved by organosilicon has excellent heat resistance, hunger resistance and repellency. The utility model can prolong the service time of the dust skeleton, and bring the excellent and the same performance of the organosilicon.

　　The surface treatment of organosilicon dust removal framework usually uses chemical treatment to clean the oil, rust, oxide skin and other sundries on the surface of the bag, so as to eliminate the factors affecting the combination of chemistry and polarity. Selection of coating method: according to the working conditions of the dust collector, the coating material of the package and the coating of the bag cover can be determined. We usually choose two kinds of zinc plating and silica gel spraying.