Cxs glass fiber bag dust collector

　　Cxs glass fiber bag dust collector can be used for particle dust collection, with large waste gas treatment capacity and small resistance. It is suitable for dust removal of cement mill, dryer, crusher and other process equipment, as well as for dust removal of grain, metallurgy and other industries. It is widely used for purification of industrial waste gas such as cement, power, metallurgy and carbon black.

　　Cxs glass fiber bag dust collector is a kind of very practical dust collector which can maintain long-term operation efficiency and long-term stability above 99.9% under 260 ℃ and high concentration of flue gas. Cxs glass fiber bag dust collector can be divided into positive and negative pressure. It adopts automatic bag shrinking and dust cleaning setting, and is equipped with microprocessor control device. It can operate normally under the setting of timing and constant resistance conditions, and can be maintained without shutdown without affecting production.

　　Structure of Cxs glass fiber bag dust collector:

　　1. Intake, exhaust and blowback system: including intake pipe, intake chamber, blowback valve, blowback pipe, three-way pipe, exhaust valve and exhaust pipe.

　　2. Bag chamber structure: including ash hopper, access door, body frame, upper and lower flower plate, filter bag and bag chamber.

　　3. Ash discharge system: including ash discharge valve and screw conveyor.

　　The Cxs glass fiber bag dust collector is of all steel structure and designed with exothermic expansion mechanism measures. The shell adopts lby light rock wool board double-layer heat preservation, the surface is protected by galvanized board, and the new process of pulling rivets is adopted for installation. The flower board adopts cold stamping rolling forming process to increase the strength and ensure the quality of dust removal equipment. The bag of dust remover adopts the glass fiber bag treated with RH formula, which has excellent bending resistance, wear resistance, strength and high temperature resistance.

　　Working principle of Cxs glass fiber bag dust collector:

　　The dust containing gas enters the ash hopper through the air inlet pipe, and then flows upward through the filter bag in the tank for purification. After that, it is discharged to the air outlet pipe from the main valve plate opened by the electric three-way valve. The gas in the air outlet pipe is then discharged into the atmosphere through the centrifugal fan and the chimney. The ash cleaning process is in accordance with the time procedure. Each room automatically cleans the ash in turn according to the adjustable time parameters. The dust cleaning cycle of the dust remover can be set and adjusted according to the process requirements.

　　Features of Cxs glass fiber bag dust collector:

　　1. Strong adaptability. It can operate effectively under the working conditions of high temperature (260 ℃, instant 280 ℃), high dust content (100g / Nm3) and high temperature (dew point 60 ℃).

　　2. The dust collection efficiency is more than 99.9%, and the emission concentration is less than 50mg / Nm3, so as to achieve smoke-free and dust-free, and ensure that the discharge meets the standard.

　　3. The design is thoughtful and the structure is reasonable. Able to carry out maintenance without shutdown without affecting production.

　　4. The filter bag has a long service life with long bag back blowing cleaning technology, anti condensation structure design and advanced temperature automatic control system.

　　5. The equipment is reliable in use, simple in operation and low in operation cost.